Name | alpha-methyldopa |
Synonyms | METHYLDOPA alpha-methyldopa (S)-(-)-alpha-Methyldopa 3-hydroxy-N-methyltyrosine 3-Hydroxy-α-methyl-L-tyrosine 3-Hydroxy-alpha-methyl-L-tyrosine L-A-METHYL DOPA MK-351, METHYLDOPA L-Tyrosine, 3-hydroxy-.alpha.-methyl- 2-METHYL-3-(3,4-DIHYDROXYPHENYL)ALANINE 3-(3,4-Dihydroxyphenyl)-α-methyl-L-alanine (2S)-2-Amino-3-(3,4-dihydroxyphenyl)-2-methylpropanoic acid |
CAS | 555-30-6 |
EINECS | 209-089-2 |
InChI | InChI=1/C10H13NO4/c1-11-7(10(14)15)4-6-2-3-8(12)9(13)5-6/h2-3,5,7,11-13H,4H2,1H3,(H,14,15) |
Molecular Formula | C10H13NO4 |
Molar Mass | 211.22 |
Density | 1.2545 (rough estimate) |
Melting Point | ≥300°C |
Boling Point | 350.89°C (rough estimate) |
Flash Point | 217.7°C |
Water Solubility | 10g/L(temperature not stated) |
Vapor Presure | 2.19E-08mmHg at 25°C |
Appearance | powder to crystal |
Color | White to Almost white |
Merck | 14,6055 |
pKa | 2.28±0.26(Predicted) |
Storage Condition | Sealed in dry,2-8°C |
Refractive Index | -14 ° (C=1, H2O) |
Physical and Chemical Properties | Soluble in hot water, dilute acid and dilute alkali, slightly soluble in cold water and acetone and other organic solvents. |
Use | L-Methyldopa is a B- receptor blocking cardiovascular drug that has a good effect on moderate-procedure primary and renal hypertension. |
Safety Description | S24/25 - Avoid contact with skin and eyes. |
WGK Germany | 3 |
RTECS | YP2860000 |
FLUKA BRAND F CODES | 10-23 |
HS Code | 29181990 |
Toxicity | LD50 oral in rabbit: 713mg/kg |
This product is L-3-(3, 4-dihydroxyphenyl)-2-methylalanine sesquihydrate. Calculated as dried product, including C10H13NO4, not less than 98.0%.
take this product, precision weighing, add aluminum chloride solution (take aluminum chloride hexahydrate 65g, add water to 100ml, add activated carbon 0.5g, shake for 10 minutes, filter, the filtrate was dissolved and quantitatively diluted with 1% sodium hydroxide solution to adjust the pH value to 1.5) to make a solution containing 44mg per 1 ml, which was measured according to law (General rule 0621), and the specific rotation was from 251 ° to 30 °.
take this product l. Add 100ml of fresh boiling cold water and add 1 drop of Methyl red indicator solution, if it is red, add 0.1 ml of sodium hydroxide titration solution (0.5 mol/L), which should be yellow.
take 0.25g of this product and check it according to law (General rule 0801). Compared with the control solution made of 0.028% of standard gasification sodium solution, it shall not be deeper ().
take an appropriate amount of this product, add the mobile phase to dissolve and quantitatively dilute to prepare a solution containing about 1 mg per 1 ml as a test solution; Take an appropriate amount for precision measurement, A solution containing 5ug per 1 ml was prepared as a control solution by quantitative dilution with mobile phase. According to the determination of high performance liquid chromatography (General rule 0512), silica gel bonded with eighteen alkyl silane was used as filler; Acetonitrile-phosphate buffer solution (2g of potassium dihydrogen phosphate and lg of phosphoric acid were taken and dissolved in of water)(5:95) as mobile phase; The detection wavelength was 278nm. The number of theoretical plates is not less than 2000 calculated from the methyl dopa peak. 20 u1 of the test solution and the control solution were respectively injected into the human liquid chromatograph, and the chromatogram was recorded to 8 times of the retention time of the main component peak. If the impurity peak is shown in the chromatogram of the test solution, the area of a single impurity peak shall not be greater than the area of the main peak of the control solution (0.5% ) , the sum of each impurity peak area shall not be greater than 2 times (1.0%) of the main peak area of the control solution.
take this product, dry to constant weight at 125°C, weight loss should be 10.0% ~ 13.0% (General 0831).
take l.Og of this product and check it according to law (General rule 0841). The residue left shall not exceed 0.1%.
The residue left under the item of taking the ignition residue shall not contain more than 10 parts per million of heavy metal when examined by law (General Principles 0821, Law II).
take this product about 0.15g, precision weighing, add glacial acetic acid dissolved in 20ml, add crystal violet indicator liquid 1 drop, with high gas acid titration solution (0.1 mol/L titration to solution blue-green, and the results of the titration with blank test correction. Each 1 ml of perchloric acid titration solution (0.1 mol/L) corresponds to 21.12mg of C10H13N04.
antihypertensive drugs.
light shielding, sealed storage.
This product contains methyl DOPA (C10H13N04) should be 95.0%-105.0% of the label.
This product is sugar-coated tablets, White after removing the coating.
Take 20 tablets of this product, remove the coating, precision weighing, fine grinding, precision weighing appropriate amount (about equivalent to methyl dopa O.lg ), put it in a 100ml measuring flask, add an appropriate amount of 0.05mol/L sulfuric acid solution, shake to dissolve methyldopa, add 0.05mol/L sulfuric acid solution to the scale, shake well, filter, precisely take 5ml of continued filtrate, put it in a 100ml measuring flask, add ferrous citrate sulfate solution [Take lg of sodium pyrosulfite, add 200ml of water to dissolve, add lml of hydrochloric acid titration solution (lmol/L), ferrous sulfate 1.5g and sodium citrate 10G, mixed, obtained. This solution should be freshly prepared] 2ml mixed with amino acetate buffer solution (sodium bicarbonate 42g, potassium bicarbonate 50g and water 180ml); 37.5g of amino acetic acid and concentrated ammonia test solution 15ml were added with water to dissolve in 180ml. The two solutions were mixed, and water was added to 0401 ml)8ml, diluted to the scale with water, shaken, and the absorbance was measured by ultraviolet-visible spectrophotometry (general) at a wavelength of 550mn. In addition, take the methyldopa reference substance 0.lg accurately, put it in a 100ml measuring flask, add 0.05md/L sulfuric acid solution to dissolve and dilute to the scale, shake well, take 5ml accurately and put it in a 100ml measuring flask, according to the above method, from the "add ferrous sulfate citrate solution", the same method of determination, calculation, that is.
Same as methyldopa.
10.25g (as C10H13NO4)
light shielding, sealed storage.